JOURNAL OF MECHANICAL DESIGN WEBINARS
Webinars take place online, approximately every three months, for a duration of 1.5 hours.
Each webinar features invited presentations of recently published/accepted articles in JMD. Each JMD webinar will include two sessions:
(1) a 90-minute Zoom webinar session in which selected papers will be featured with presentations (10-20 minutes each) followed by a panel discussion, and
(2) a 30-minute gather.town session for further discussion/networking among speakers and seminar attendees.
Recordings of past webinars can be viewed through the links below.
CONTACT US
Please send inquiries about the webinar to Dr. Carolyn Conner Seepersad (Editor-in-Chief) or Dr. Faez Ahmed (Featured Articles Editor).
Past Webinars
- 1 - DATA-DRIVEN APPROACHES FOR ENGINEERING DESIGN
- 2 - TEAM SCIENCE IN ENGINEERING DESIGN
- 3 - DESIGN FOR ADDITIVE MANUFACTURING
- 4 - ROBOT DESIGN
- 5 - DESIGN ENGINEERING IN THE AGE OF INDUSTRY 4.0
- 6 - ARTIFICIAL INTELLIGENCE IN ENGINEERING DESIGN
- 7 - INTEGRATED DESIGN AND OPERATION OF ENGINEERING SYSTEMS WITH PREDICTIVE MODELING
- 8 - CO-DESIGN OF ROBOTIC SYSTEMS
- 9 - EMERGING TECHNOLOGIES & METHODS FOR EARLY-STAGE PRODUCT DESIGN AND DEVELOPMENT
- 10 - TOPOLOGY OPTIMIZATION
- 11 - JOINT SPECIAL SECTIONS: ADVANCES IN DESIGN AND MANUFACTURING FOR SUSTAINABILITY
- 12th- JMD Webinar. Design of Materials and Structures
- 13th - JMD Webinar. Datasets in Engineering Design
- 14th - JMD Webinar. NETWORKS AND GRAPHS FOR ENGINEERING SYSTEMS DESIGN
In the ever-evolving landscape of engineering, the fusion of network science and graph theories has emerged as a dynamic force, revolutionizing the way we represent, design, model, and optimize complex systems. Networks, defined by nodes and edges, are particularly effective for modeling the interactions and interdependencies among individual entities in complex systems. Networks have become the cornerstone for comprehending the intricate relationships underlying a myriad of engineering domains. From transportation networks optimizing urban mobility, power grids ensuring energy efficiency and resilience, and social networks shaping human interactions to biological networks inspiring human-engineered system design, the application of network science and graphs in engineering spans a vast spectrum of disciplines. This JMD-JCISE webinar is dedicated to promoting the dissemination of knowledge on complex networks in engineering systems and design, and to highlighting the latest advances at the intersection of network science, graph theory, AI, and engineering.
Webinar Agenda
- 10:00 – 10:15 AM: Introduction
- 10:15 – 11:05 AM: AE Overview
- 10:15 – 11:05 AM: Invited Talks
- 11:05 – 11:25 AM: Q&A / Discussion
- 11:25 – 11:30 AM: Closing
- 11:30 – 11:45 AM: Optional Networking Session
John Morris
Morris, J., Mocko, G., and Wagner, J. (April 30, 2025). “Unified System Modeling and Simulation via Constraint Hypergraphs.” ASME. J. Comput. Inf. Sci. Eng. June 2025; 25(6): 061005. https://doi.org/10.1115/1.4068375
Giota Paparistodimou
Paparistodimou, G., Knight, P., Robb, M., and Hughes, G. (May 12, 2025). “Dynamic Dual-Layer Network Resilience Assessment as a System Architecting Tool.” ASME. J. Mech. Des. November 2025; 147(11): 111401. https://doi.org/10.1115/1.4068458
Saeid Bayat
Bayat, S., Shahmansouri, N., Peddada, S. R. T., Tessier, A., Butscher, A., and Allison, J. T. (October 29, 2025). “Can Graph Neural Networks Help Identify Promising Thermal Management System Architectures Among Vast Numbers of Possibilities?.” ASME. J. Mech. Des. May 2026; 148(5): 051701. https://doi.org/10.1115/1.4069829
Yuliang Li
Zheng, J., and Li, Y. (October 30, 2025). “An Integrated Task-Parameter Network Framework with Sensitivity Mapping and Path Enumeration for Objective Dependency Analysis in Complex Design Processes.” ASME. J. Mech. Des. May 2026; 148(5): 051401. https://doi.org/10.1115/1.4069895
13th Webinar
July 14, 2025 11:00 AM EST
The webinar theme is:
Datasets in Engineering Design
This webinar highlights cutting-edge research showcasing the importance and application of high-quality datasets in engineering design. Speakers will present key findings from selected papers, emphasizing novel approaches to dataset creation, challenges in data integration, management of multi-modal and real-time data, and the role datasets play in enhancing engineering design theories, methodologies, and education. The event features short presentations followed by an engaging panel discussion with leading experts, providing attendees an opportunity to gain insights into best practices, emerging challenges, and future trends in data-driven engineering design.
- Welcome
- Introduction of Speakers
- Question and Answer Session
Pingfeng/In-bum Chung
Dataset on Complex Power Systems: Design for Resilient Transmission Networks Using a Generative Model Paper No: MD-24-1452
Yigitcan Comlek
Heterogeneous Multi-Source Data Fusion Through Input Mapping and Latent Variable Gaussian Process Paper No: MD-24-1500
Namwoo Kang
DeepJEB: 3D Deep Learning-Based Synthetic Jet Engine Bracket Dataset Paper No: MD-24-1402
Chris McComb and Binyang Song
HUVER: The HyForm Uncrewed Vehicle Engineering Repository
Paper No: MD-24-1459
Oluwatoba Fabunmi
Large Language Models for Predicting Empathic Accuracy Between a Designer and a User. Paper No: MD-24-1560
Zhenghui Sha
Large Language Models for Computer-Aided Design Fine Tuned: Dataset and Experiments: Paper No: MD-24-1560
12th Webinar
January 16, 2025 11:00 AM EST
The webinar theme is:
Design of Materials and Structures
The JMD Webinar is a series of webinars organized quarterly by the Editorial Board of the ASME Journal of Mechanical Design(JMD) serving the engineering design research community. Our intention is to share the latest research published in the journal, and by doing so, to keep our community connected.
This JMD webinar will include two sessions:
(1) a 90-minute Zoom webinar session in which four selected papers will be featured with presentations and Q&A sessions, and
(2) an optional 30-minute gather.town session for further discussion/networking among speakers and seminar attendees
- Introduction
- JMD Featured Talks
- Q&A/Discussion
- Networking(30 Minutes) Participants were invited to join a 30-minute networking event on Town
Kristina Shea (ETH Zurich)
Thomas S. Lumpe, Kristina Shea
Computational Design of MultiState Lattice Structures With Finite Mechanisms for Shape Morphing
Paper No: MD-22-1267
Nathan Hertlein (AFRL)
Kumar Vemaganti, Sam Anand
Design Optimization of Lattice Structures Under Impact Loading for Additive Manufacturing
Paper No: MD-23-1795
Andres Tovar (Purdue)
Joel Najmon, Andres Tovar
Evaluation of Neural Network-Based Derivatives for Topology Optimization
Raymundo Arroyave (TAMU)
Danial Khatamsaz, Raymundo Arroyave, Douglas L. Allaire
Asynchronous Multi-Information Source Bayesian Optimization
Paper No: MD-23-1722
11th Webinar : JOINT SPECIAL SECTIONS: ADVANCES IN DESIGN AND MANUFACTURING FOR SUSTAINABILITY
This 11th Thematic Webinar was based on the Joint Special Sections: Advances in Design and Manufacturing for Sustainability, published in the February 2024 issues of the ASME Journal of Mechanical Design (JMD) and ASME Journal of Manufacturing Science and Engineering (JMSE). The webinar was held on April 2, 2024, 11:00 AM (Eastern United States) and included two sessions: (1) a 90-minute Zoom webinar session with presentations and Q&As, and (2) an optional 30-minute gather.town session for networking. A recording of the presentations can be viewed on the JMD Webinar YouTube channel through the link below.
JMD-JMSE Joint Webinar – 11th Thematic Session
Theme: Advances in Design and Manufacturing for Sustainability
Date: April 2, 2024, 11:00 AM Eastern Time (United States)
1. Introduction
2a. JMD Featured Talks
Alexa Rea (University of Toronto)
L. Rea, L. H. Corbit, and L. H. Shu. Does Fan Feel and Visibility during Thermostat Interaction Affect Temperature Selection in Warm Ambient Conditions?
Núria Boix Rodríguez (KU Leuven)
Núria Boix Rodríguez and Claudio Favi. Disassembly and Repairability of Mechatronic Products: Insight for Engineering Design.
2b. JMSE Featured Talks
Abigail Clarke-Sather (University of Minnesota Duluth)
Paulo Henrique Teixeira França Alves, Gracie Bahr, Abigail R. Clarke-Sather, and Melissa A. Maurer-Jones. Combining Flexible and Sustainable Design Principles for Evaluating Designs: Textile Recycling Application.
Kamyar Raoufi (Oregon State University)
Kamyar Raoufi and Karl R. Haapala. Manufacturing Process and System Sustainability Analysis Tool: A Proof-of-Concept for Teaching Sustainable Product Design and Manufacturing Engineering.
3. Q&A/Discussion
4. Networking (30 Minutes)
Participants are invited to join a 30-minute networking event on Gather.Town (link to be provided to registered attendees during the event)
10th Webinar : TOPOLOGY OPTIMIZATION
JMD’s 10th Webinar on “Topology Optimization” was held on November 14, 2023, 11:00 AM (Eastern United States).
JMD Webinar 10th Thematic Session
Theme: Topology Optimization
Date And Time: November 14, 2023, 11:00 AM Eastern Time (United States)
1. Introduction
2. Speaker Talks
Satya R. T. Peddada (University of Illinois at Urbana-Champaign, USA)
Peddada, S. R. T., Zeidner, L. E., Ilies, H. T., James, K. A., and Allison, J. T. (August 26, 2022). “Toward Holistic Design of Spatial Packaging of Interconnected Systems With Physical Interactions (SPI2).” ASME. J. Mech. Des. December 2022; 144(12): 120801. Https://Doi.Org/10.1115/1.4055055
Levent Burak Kara (Carnegie Mellon University, USA)
Chen, H., Joglekar, A., Whitefoot, K. S., and Burak Kara, L. (June 23, 2023). “Concurrent Build Direction, Part Segmentation, and Topology Optimization for Additive Manufacturing Using Neural Networks.” ASME. J. Mech. Des. September 2023; 145(9): 091702. Https://Doi.Org/10.1115/1.4062663
Faez Ahmed (Massachusetts Institute of Technology, USA)
Regenwetter, L., Nobari, A. H., and Ahmed, F. (March 18, 2022). “Deep Generative Models in Engineering Design: A Review.” ASME. J. Mech. Des. July 2022; 144(7): 071704. Https://Doi.Org/10.1115/1.4053859
Qian Ye (State University of New York at Stony Brook, USA)
Ye, Q., Gu, X. D., and Chen, S. (March 31, 2022). “Variational Level Set Method for Topology Optimization of Origami Fold Patterns.” ASME. J. Mech. Des. August 2022; 144(8): 081702. Https://Doi.Org/10.1115/1.4053925
3. Q&A/Discussion
4. Networking (30 Minutes)
Participants are invited to join a 30-minute networking event on Gather.Town (link to be provided to registered attendees during the event)
9th Webinar : EMERGING TECHNOLOGIES AND METHODS FOR EARLY-STAGE PRODUCT DESIGN AND DEVELOPMENT
JMD’s 9th Webinar on “Emerging Technologies and Methods for Early-Stage Product Design and Development” is based on the April 2023 Special Issue (Vol. 145, Issue 4) and was held on May 1, 2023, 12:00 PM (Eastern Time United States).
JMD Webinar 9th Thematic Session
Theme: Emerging Technologies and Methods for Early-Stage Product Design and Development, based on the April 2023 Special Issue (Vol. 145, Issue 4).
Date And Time: May 1, 2023, 12:00 PM Eastern Time (United States)
1. Introduction
2. Speaker Talks
Jonatan Escorcia-Hernandez (Université Paris-Saclay, CEA LIST, France)
Escorcia-Hernandez, J. M., Grossard, M., and Gosselin, F. “Task-Oriented Methodology Combining Human Manual Gestures and Robotic Grasp Stability Analyses: Application to the Specification of Dexterous Robotic Grippers.” ASME. J. Mech. Des. April 2023; 145(4): 041408. https://doi.org/10.1115/1.4056493
Jana I. Saadi (Massachusetts Institute of Technology, USA)
Saadi, J. I., and Yang, M. C. “Generative Design: Reframing the Role of the Designer in Early-Stage Design Process.” ASME. J. Mech. Des. April 2023; 145(4): 041411. https://doi.org/10.1115/1.4056799
Chenxi (Chelsea) Yuan (Northeastern University, USA)
Yuan, C., Marion, T., and Moghaddam, M. “DDE-GAN: Integrating a Data-Driven Design Evaluator Into Generative Adversarial Networks for Desirable and Diverse Concept Generation.” ASME. J. Mech. Des. April 2023; 145(4): 041407. https://doi.org/10.1115/1.4056500
Almudena Palacios-Ibáñez (Universitat Politècnica de València, SPAIN)
Palacios-Ibáñez, A., Alonso-García, M., Contero, M., and Camba, J. D. “The Influence of Hand Tracking and Haptic Feedback for Virtual Prototype Evaluation in the Product Design Process.” ASME. J. Mech. Des. April 2023; 145(4): 041403. https://doi.org/10.1115/1.4055952
3. Q&A/Discussion
4. Networking (30 Minutes)
Participants are invited to join a 30-minute networking event on Gather.Town (link to be provided to registered attendees during the event).
8th Webinar :
CO-DESIGN OF ROBOTIC SYSTEMS
JMD’s 8th Webinar on “Co-Design of Robotic Systems” was held on March 20, 2023, 11:00 AM (Eastern Time United States).
JMD Webinar 8th Thematic Session
Theme: Co-Design of Robotic Systems
Date and Time: March 20, 2023, 11:00 AM Eastern time (United States)
1. Introduction
2. Speaker Presentations
Tun Wang (King’s College London)
Tun Wang, Enea Olivoni, Emmanouil Spyrakos-Papastavridis, Rory J. O’Connor, Jian S. Dai, Novel Design Of A Rotation Center Auto-Matched Ankle Rehabilitation Exoskeleton With Decoupled Control Capacity, ASME. J. Mech. Des. May 2022, 144(5): 053301. Https://Doi.Org/10.1115/1.4052842
Aamir Hayat (Singapore University of Technology and Design)
A.A. Hayat, Lim Yi, M. Kalimuthu, M.R. Elara, K.L. Wood, Reconfigurable Robotic System Design With Application to Cleaning and Maintenance, ASME. J. Mech. Des. Jun 2022, 144(6): 063305. Https://Doi.Org/10.1115/1.4053631
Cecilia Scoccia (Universitá Politecnica delle Marche)
Cecilia Scoccia, Luca Carbonari, Giacomo Palmieri, Massimo Callegari, Marco Rossi, Placido Munafó, Francesco Marchione, Gianluca Chiappini, Design of a Tensegrity Servo-Actuated Structure for Civil Applications, ASME. J. Mech. Des. Apr 2022, 144(4): 043302. Https://Doi.Org/10.1115/1.4053283
Hongyan Tang (University of Shanghai for Science and Technology)
Hongyan Tang, James W. Zhang, Lanqing Pan, Dan Zhang, Optimum Design for a New Reconfigurable Two-Wheeled Self-Balancing Robot Based on Virtual Equivalent Parallel Mechanism, ASME. J. Mech. Des. May 2023, 145(5): 053302. Https://Doi.Org/10.1115/1.4056575
3. Q&A/Discussion
4. Networking (30 Minutes)
Participants are invited to join a 30-minute networking event on Gather.Town (link to be provided to registered attendees during the event).
Tab Content
7th Webinar :
INTEGRATED DESIGN AND OPERATION OF ENGINEERING SYSTEMS WITH PREDICTIVE MODELING
JMD’s 7th Webinar on “Integrated Design and Operation of Engineering Systems with Predictive Modeling” was held on October 25, 2022, 11:00 AM (Eastern Time United States).
JMD Webinar 7th Thematic Session
Theme: Integrated Design and Operation of Engineering Systems with predictive modeling
Date and Time: October 25, 2022, 11:00 AM Eastern time (United States)
1. Introduction and Summary of Special Issue (ASME. J. Mech. Des. Sep 2022, Volume 144, Issue 9)
2. Speaker Presentations
Zhen Hu (University of Michigan)
Yixuan Liu, Chen Jiang, Xiaoge Zhang, Zissimos Mourelatos, Dakota Barthlow, David Gorsich, Amandeep Singh, Zhen Hu, Reliability-Based Multivehicle Path Planning Under Uncertainty Using a Bio-Inspired Approach, ASME. J. Mech. Des. Sep 2022, 144(9): 091701 Https://Doi.Org/10.1115/1.4053217
Zhimin Xi (Rutgers University)
Lichuan Ren, Zhimin Xi, Bias-Learning-Based Model Predictive Controller Design for Reliable Path Tracking of Autonomous Vehicles Under Model and Environmental Uncertainty, ASME. J. Mech. Des. Sep 2022, 144(9): 091706. Https://Doi.Org/10.1115/1.4054674
Paromita Nath (Rowan University)
Paromita Nath, Sankaran Mahadevan, Probabilistic Digital Twin for Additive Manufacturing Process Design and Control, ASME. J. Mech. Des. Sep 2022, 144(9):091704. Https://Doi.Org/10.1115/1.4054521
Daniel A. McAdams (Texas A&M University)
Maulik C. Kotecha, David Staack, Daniel A. McAdams, Functional Modeling-Based Digital Twin Architecture Representation: An Instructional Example of a COVID-19 Breathalyzer Kiosk, ASME. J. Mech. Des. Sep 2022, 144(9): 091401. Https://Doi.Org/10.1115/1.4055136.
3. Q&A/Discussion
4. Networking (30 Minutes)
Participants are invited to join a 30-minute networking event on Gather.Town (link to be provided to registered attendees during the event).
6th Webinar :
ARTIFICIAL INTELLIGENCE IN ENGINEERING DESIGN
JMD’s 6th Webinar on “Artificial Intelligence in Engineering Design” was held on August 1, 2022, 12:00 PM EDT. View the recording and more info below.
JMD Webinar 6th Thematic Session
Theme: Artificial Intelligence in Engineering Design
Date and Time: August 1, 2022, 12:00 PM EDT
1. Introduction and Summary of Special Issue (ASME. J. Mech. Des. Feb 2022)
2. Speaker Presentations
Sayan Ghosh (General Electric Research)
Sayan Ghosh, Govinda Anantha Padmanabha, Cheng Peng, Valeria Andreoli, Steven Atkinson, Piyush Pandita, Thomas Vandeputte, Nicholas Zabaras, and Liping Wang, Inverse Aerodynamic Design of Gas Turbine Blades Using Probabilistic Machine Learning, ASME. J. Mech. Des. Feb 2022, 144(2): 021706, https://doi.org/10.1115/1.4052301.
Christopher McComb (Carnegie Mellon University)
Ayush Raina, Jonathan Cagan, and Christopher McComb, Design Strategy Network: A Deep Hierarchical Framework to Represent Generative Design Strategies in Complex Action Spaces, ASME. J. Mech. Des. Feb 2022, 144(2): 021404, https://doi.org/10.1115/1.4052566.
Kshitij Mall (Purdue University)
Adam Dachowicz, Kshitij Mall, Prajwal Balasubramani, Apoorv Maheshwari, Ali K. Raz, Jitesh H. Panchal, and Daniel A. DeLaurentis, Mission Engineering and Design Using Real-Time Strategy Games: An Explainable AI Approach, ASME. J. Mech. Des. Feb 2022, 144(2): 021710, https://doi.org/10.1115/1.4052841.
Caitlin Mueller (M.I.T.)
Eamon Whalen and Caitlin Mueller, Toward Reusable Surrogate Models: Graph-Based Transfer Learning on Trusses, ASME. J. Mech. Des. Feb 2022, 144(2): 021704, https://doi.org/10.1115/1.4052298.
3. Q&A/Discussion
4. Networking (30 Minutes)
Participants are invited to join a 30-minute networking event on Gather.Town (link to be provided to registered attendees during the event).
5th Webinar :
DESIGN ENGINEERING IN THE AGE OF INDUSTRY 4.0
JMD’s 5th Webinar on “Design Engineering in the Age of Industry 4.0” was held on May 10, 2022, 8:00 AM Pacific US, 10:00 AM Central US, 11:00 AM Eastern US, 4:00 PM UK, 8:30 PM India, 11:00 PM Beijing. View the recording and more info below.
JMD Webinar Fifth Thematic Session
Theme: Design Engineering in the Age of Industry 4.0
Date and Time: May 10, 2022, 8:00 AM Pacific US, 10:00 AM Central US, 11:00 AM Eastern US, 4:00 PM UK, 8:30 PM India, 11:00 PM Beijing
1. Opening and Summary of Special Issue (ASME. J. Mech. Des. Jul 2021) (10 minutes)
2. Showcase of Four Papers (40 Minutes)
Speaker: Jitesh H. Panchal (Purdue University)/Coordinator: Janet K. Allen (University of Oklahoma
Roger Jiao, Sesh Commuri, Jitesh Panchal, Jelena Milisavljevic-Syed, Janet K. Allen, Farrokh Mistree and Dirk Schaefer, Design Engineering in the Age of Industry 4.0, ASME. J. Mech. Des. Jul 2021, 143(7): 070801. https://doi.org/10.1115/1.4051041
Speaker and Coordinator: Xueguan Song (Dalian University of Technology)
Xiaonan Lai, Shuo Wang, Zhenggang Guo, Chao Zhang, Wei Sun, Xueguan Song, Designing a Shape–Performance Integrated Digital Twin Based on Multiple Models and Dynamic Data: A Boom Crane Example, ASME. J. Mech. Des. Jul 2021, 143(7): 071703. https://doi.org/10.1115/1.4049861
Speaker: Qiliang Chen (Northeastern University)/Coordinator: Babak Heydari (Northeastern University)
Qiliang Chen, Babak Heydari, Mohsen Moghaddam, Leveraging Task Modularity in Reinforcement Learning for Adaptable Industry 4.0 Automation, ASME. J. Mech. Des. Jul 2021, 143(7): 071701. https://doi.org/10.1115/1.4049531
Speaker: Jelena Milisavljevic-Syed (University of Liverpool)/Coordinator: Guoxin Wang (Beijing Institute of Technology)
Ru Wang, Jelena Milisavljevic-Syed, Lin Guo, Yu Huang, Guoxin Wang, Knowledge-Based Design Guidance System for Cloud-Based Decision Support in the Design of Complex Engineered Systems, ASME. J. Mech. Des. Jul 2021, 143(7): 070021, https://doi.org/10.1115/1.4050247
3. Moderated Dialog (30 Minutes)
4. Synthesis (10 Minutes)
5. Networking (30 Minutes)
Participants are invited to join a 30-minute networking event on Gather.Town (link to be provided to registered attendees during the event).
4th Webinar :
ROBOT DESIGN
JMD’s 4rd Webinar on “Robot Design” was held on December 9, 2021, 10:00 AM-12:00 PM (EST). View the recording and more info below.
Time: December 9, 2021, 10:00 AM – 12:00 PM (US Eastern Time)
1. Welcome By Dr. Qiaode Jeffrey Ge (JMD Editor For Mechanisms) (5 Min
2. Introduction By Dr. Haijun Su and Carl Nelson (JMD Associate Editors) (10 Mins)
3. Featured Talks (60 Mins)
Guanglu Jia (Harbin Institute Of Technology): Guanglu Jia, Hailin Huang, Hongwei Guo, Bing Li, Jian S. Dai, Design Of Transformable Hinged Ori-Block Dissected From Cylinders And Cones, ASME. J. Mech. Des. September 2021, 143(9): 094501
Yu She (Purdue University): Yu She, Siyang Song, Hai-Jun Su, Junmin Wang, A Comparative Study On The Effect Of Mechanical Compliance For A Safe Physical Human-Robot Interaction, ASME. J. Mech. Des. June 2020, 142(6): 063305
Andrew P. Sabelhaus (Boston University): Andrew P. Sabelhaus, Kyle Zampaglione, Ellande Tang, Lee-Huang Chen, Adrian K. Agogino, Alice M. Agogino, Double-Helix Linear Actuators, ASME. J. Mech. Des. October 2021, 143(10): 103301
4. Panel Discussion (10 Mins)
5. Group Photo and Mini-Networking Session (5 Mins)
6. Networking Event On Gather.Town: Link Will Be Provided To Registered Attendees (30 Mins)
3rd Webinar :
DESIGN FOR ADDITIVE MANUFACTURING
JMD’s 3rd Webinar on “Design for Additive Manufacturing” was held on September 16, 2021, 12:00-2:00PM (EDT). Recordings and more info are posted below.
Time: September 16, 2021, 12PM-2PM (US Eastern Time)
1. Introduction by Dr. Yaoyao Fiona Zhao and Dr. Julián Norato (Associate Editors, JMD)
2. Featured Talks
Saigopal Nelaturi (Palo Alto Research Center)
Erva Ulu, Nurcan Gecer Ulu, Walter Hsiao, Saigopal Nelaturi, “Manufacturability Oriented Model Correction and Build Direction Optimization for Additive Manufacturing,” J. Mech. Des. June 2020, 142(6): 062001, https://doi.org/10.1115/1.4045107
Carolyn Connor Seepersad (University of Texas at Austin)
Jenmy Zimi Zhang, Conner Sharpe, Carolyn Conner Seepersad, “Stress-Constrained Design of Functionally Graded Lattice Structures With Spline-Based Dimensionality Prediction,” J. Mech. Des. Sep 2020, 142(9): 09170, https://doi.org/10.1115/1.4046237.
Kate S. Whitefoot (Carnegie Mellon University)
Zhenguo Nie, Sangjin Jung, Levent Burak Kara, Kate S. Whitefoot, “Optimization of Part Consolidation for Minimum Production Costs and Time Using Additive Manufacturing,” J. Mech. Des. July 2020; 142(7): 072001, https://doi.org/10.1115/1.4045106.
Nicholas A. Meisel (Pennsylvania State University)
Rohan Prabu, Scarlett R. Miller, Timothy W. Simpson, and Nicholas A. Meisel, “But Will It Build? Assessing Student Engineering Designers’ Use of Design for Additive Manufacturing Considerations in Design Outcomes,” J. Mech. Dec. September 2020; 142(9): 092001, https://doi.org/10.1115/1.4046071
3. Panel Discussion
4. Networking event on gather.town: link will be provided to registered attendees
2nd Webinar :
TEAM SCIENCE IN ENGINEERING DESIGN
The second JMD Webinar on “Team Science in Engineering Design,” was held on May 10, 2021, at 12:00 noon (US Eastern Time).
Time: May 10, 2021, at 12:00 noon (US Eastern Time)
1. Introduction by Dr. Scarlett Miller (Associate Editor, JMD)
2. Featured Talks
Dr. Kosa Goucher-Lambert (University of California-Berkeley)
Vivek Rao, Euiyoung Kim, Jieun Kwon, Alice M. Agogino, and Kosa Goucher-Lambert, “Framing and Tracing Human-Centered Design Teams’ Method Selection: An Examination of Decision-Making Strategies,” J. Mech. Des. Mar 2021, 143(3): 031403, https://doi.org/10.1115/1.4049081
Dr. Faez Ahmed (Massachusetts Institute of Technology)
Faez Ahmed, John Dickerson, and Mark Fuge, “Forming Diverse Teams From Sequentially Arriving People,” J. Mech. Des. November 2020, 142(11): 111401, https://doi.org/10.1115/1.4046998
Dr. Jonathan Cagan (Carnegie Mellon University)
Ethan Brownell, Jonathan Cagan, and Kenneth Kotovsky, “Only as Strong as the Strongest Link: The Relative Contribution of Individual Team Member Proficiency in Configuration Design,” J. Mech. Des. August 2021, 143(8): 081402, https://doi.org/10.1115/1.4049338
Dr. Jessica Menold (The Pennsylvania State University)
Jacob Nelson and Jessica Menold, “Between Worlds: Exploring the Links Between the Tangible and Intangible Costs of Prototypes,” J. Mech. Des. March 2021, 143(3): 031402, https://doi.org/10.1115/1.4048733
3. Panel Discussion
4. Networking event on gather.town starting at 1:30 pm (gather.town link will be provided to registered attendees)
1st Webinar :
DATA-DRIVEN APPROACHES FOR ENGINEERING DESIGN
The first JMD Webinar on “Data-driven Approaches for Engineering Design,” was held on February 16, 2021 at 12 noon EST.
The first JMD Webinar on “Data-driven Approaches for Engineering Design,” was held on February 16, 2021 at 12 noon EST.
Agenda
Time: February 16, 2021 at 12 noon EST
- Introduction by Dr. Wei Chen (Technical Editor, JMD)
- Overview by Dr. Chris Hoyle (Associate Editor, JMD)
- Talks
- Dr. Namwoo Kang:
Oh, S., Jung, Y., Kim, S., Lee, I., and Kang, N. (September 16, 2019). “Deep Generative Design: Integration of Topology Optimization and Generative Models.” ASME. J. Mech. Des. November 2019; 141(11): 111405. https://doi.org/10.1115/1.4044229 Webinar Recording - Dr. Conrad Tucker:
Shu, D., Cunningham, J., Stump, G., Miller, S. W., Yukish, M. A., Simpson, T. W., and Tucker, C. S. (November 28, 2019). “3D Design Using Generative Adversarial Networks and Physics-Based Validation.” ASME. J. Mech. Des. July 2020; 142(7): 071701. https://doi.org/10.1115/1.4045419 Webinar Recording - Dr. Soumalya Sarkar:
Sarkar, S., Mondal, S., Joly, M., Lynch, M. E., Bopardikar, S. D., Acharya, R., and Perdikaris, P. (September 30, 2019). “Multifidelity and Multiscale Bayesian Framework for High-Dimensional Engineering Design and Calibration.” ASME. J. Mech. Des. December 2019; 141(12): 121001. https://doi.org/10.1115/1.4044598 Webinar Recording - Dr. Yan Wang:
Liu, D., and Wang, Y. (September 27, 2019). “Multi-Fidelity Physics-Constrained Neural Network and Its Application in Materials Modeling.” ASME. J. Mech. Des. December 2019; 141(12): 121403. https://doi.org/10.1115/1.4044400 Webinar Recording - Dr. Ramin Bostanabad:
Bostanabad, R., Chan, Y., Wang, L., Zhu, P., and Chen, W. (September 16, 2019). “Globally Approximate Gaussian Processes for Big Data With Application to Data-Driven Metamaterials Design.” ASME. J. Mech. Des. November 2019; 141(11): 111402. https://doi.org/10.1115/1.4044257 Webinar Recording
- Dr. Namwoo Kang:
- Networking event on gather.town starting at 1:30 pm (Link will be provided to registered attendees)
Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.